Replacement Handles For UPVC Windows

UPVC window handles come in various styles, however all of them operate the same locking mechanism. To replace a uPVC handle, remove the top screw from the base of the window handle which will reveal two more screws.

Next, measure the spindle length to ensure that the new handle is a good replacement. It is important to identify the type of handle you have, because there are a variety of sizes.

Inline Espagnolette Handles

Most double-glazed windows come with Espagnolette handles that operate multi-point locks to provide greater security. The handle is controlled by a 7mm square spindle that connects to a gearbox within the window frame. The gearbox is able to move the multi-locks as the handle is turned. They are available in a range of styles, including cockspurs inline, key, and cockspur locking handles.

Our uPVC replacement handle kits are designed to make it easy to replace a damaged or broken espagnolette window handle. These uPVC handles come with all the fixing screws as well as a range of spindle sizes suitable for the majority of applications. These handles also come with key-plugs that allow them to be changed from traditional open/closed handles fire escape or egress non locking handles (if used with the correct key plug).

If you are just looking for an espagnolette handle that can simply replace window handles your existing window handles without changing the position of the mushroom plates, we recommend our Simplefit Inline Espag Handle with 3 Spindles. These handles are designed specifically for this purpose and they come ready to fit with a range of spindle lengths already inserted so you don't need to worry about cutting them down on site. The handles are also a good choice for new build or refurbishment projects due to their excellent value and easy installation.

Another option is our Yale Sparta 2 Inline Espag Handle that has been designed to be minimally intrusive with a lower base height. It is part the suitable hardware range and comes in a range of finishes that conform to the requirements of BS EN1670:2007 Grade 5. They have been tested for durability and are suitable for use in acidic woods and coastal environments. They also work with cylinder immobiliser inserts to attain key-locking status when it is required.

Cockspur Handles

Cockspur handles, which are typically found on older uPVC or aluminum doors and windows, are a simple latch-and-catch arrangement. The handle nose is attached to or placed into the catch, which is a wedge block made of plastic that is positioned on the window frame. Since the wedges come in different sizes, it is essential to know the step height you need to buy prior to buying the new handle. Typically, uPVC frames have a handle step of 9mm. aluminium frames tend to use a step height of 21mm.

A cockspur handle can be locked with the key, which provides additional security for your home. The lock is inserted into the handle using a spindle, which fits into the handle through the hole for locking (also known as a backset). The spindle has a 7mm square cross section and can be used to open or shut the window.

It is important to make sure that the new cockspur handle is the same height as the original. It is typically measured from the base spur of the handle to the underside of the handle's nose. This measurement is sometimes called the stack height or backset. It is essential to be aware of this before purchasing any handle.

Cockspur handles are available in straight/universal, cranked or leftor right-handed versions. This allows the handles to be mounted on either the right or left opening windows and provides the operator with more ease of use.

It is crucial to determine whether or not your window needs a restrictor designed to stop the handle being opened beyond a certain point. They are typically required for high-rise buildings or commercial buildings for Replacement Handles For UPVC Windows safety reasons. The majority of homes do not require these.

There are a variety of styles and colors of cockspur handles, including stainless steel and white upvc window handle replacement steel. The best cockspur handle for your windows will depend on your personal style and taste as well as how you want the window to work.

Tilt and Turn Handles

Tilt and turn handles are a popular style of handle which are commonly seen on double glazed windows in the UK. Both timber and upvc ones have these handles. The handle is typically placed at 90 degrees, but it is also able to be turned to 180 degrees. This lets the window be fully opened to the room and also drop down to let in air. The handle is locked in this position and requires a key to unlock it whenever needed.

This type of handle can be easily replaced since it has only one large handle and not multiple smaller ones. This makes it less obvious the handle, and is more in line with modern minimalist design trends. Additionally, they are much easier to clean than casement windows because the window opens up to the inside and can be cleaned on both sides.

They are also four to eight times stronger than a casement window. This makes them ideal for larger windows and doors. The frames also have a steel core which adds durability and strength.

The tilt and turn mechanism is also safer than a casement window, as the handle can be locked at any angle. This is particularly crucial in areas where children might reside, as it will stop them from accidentally opening the window.

Tilt and turn windows are a common choice for many homes due to their ability to be used in various ways. They can be opened horizontally like windows, lowered down in a hopper fashion to allow for ventilation, or tilted inwards for cleaning and maintenance. This is a great choice for those who wish to improve the airflow inside their home. They can also assist with noise reduction. They are also easy to clean and maintain because the glass is easily removed. These windows are available in a wide range of sizes and colors. These windows are suitable for any home, and complement both modern and traditional styles.

Crank Handles

Crank handles are easy to use and provide fantastic views of the outside, without obscuring the glass. These handles are usually used on casement windows that are hinged on the side or awning windows. They are equipped with an mechanism that is similar to windows, with a linkage arm that supports the window sash, which can be opened or closed by turning the handle in the clockwise direction. The crank window's mechanism, unlike other handles, is often subjected much wear and tear. This could cause the gears and handle to break or fall off the shaft of the operator. By inspecting the crank handle and the mechanism of the operator regularly will ensure that they are in good condition for many years to come.

A crank handle consists of an electronic arm that is connected to a perpendicularly rotating shaft. The handle is rotated in a circular manner by gripping and rotating it, similar to how you would operate a sharpener. In some applications the handle could be leg-operated.

The base of the crank handle is hollow. It's this hollow that allows it to be connected to machinery and equipment. The handle's arm has an attaching bar that transforms the circular motion of the handle into rotary and reciprocating motions to control machines and equipment.

Boats are typically transported on trailers using crank handles, as well as machines and equipment that can be adjusted. They are typically made of stainless steel which is resistant to corrosion in marine environments. Most boat crank handles are coated with a powder coat to protect them from damage and make them easier for cleaning.

Replace the crank handle when it stops working or does not open the window. Look for the trim mounting screws in the track of the window frame. If there's none to be found, you can use a rigid putty blade to open the cover by sliding it between window jambs and the frame. If that doesn't help, you can remove it and open the crank by unscrewing screws from the frame of the window.